显示标签为“4A0-M01”的博文。显示所有博文
显示标签为“4A0-M01”的博文。显示所有博文

2013年12月1日星期日

Alcatel-Lucent 4A0-M01 examen pratique questions et réponses

Dans cette époque glorieuse, l'industrie IT est devenue bien intense. C'est raisonnable que le test Alcatel-Lucent 4A0-M01 soit un des tests plus populaires. Il y a de plus en plus de gens qui veulent participer ce test, et la réussite de test Alcatel-Lucent 4A0-M01 est le rêve pour les professionnels ambitieux.

Pass4Test est un fournisseur important de résume du test Certification IT dans tous les fournissurs. Les experts de Pass4Test travaillent sans arrêt juste pour augmenter la qualité de l'outil formation et vous aider à économiser le temps et l'argent. D'ailleur, le servie en ligne après vendre est toujours disponible pour vous.

Les produits de Pass4Test sont préparés pour le test Certification Alcatel-Lucent 4A0-M01, y compris les formations et les informations ciblées au test Alcatel-Lucent 4A0-M01. D'ailleurs, la Q&A de Pass4Test qui est impressionnée par la grande couverture des questions et la haute précision des réponses vous permet à réussir le test avec une haute note.

Selon les feedbacks les professionnels bien réputés dans l'Industrie IT, Pass4Test est un bon catalyseur de leurs succès. L'outil de formation offert par Pass4Test leur aide d'économiser le temps et l'argent, le plus important est qu'ils aient passé le test Alcatel-Lucent 4A0-M01 avec succès. Pass4Test est un fournissur fiable. Vous allez réaliser votre rêve avec l'aide de Pass4Test.

Code d'Examen: 4A0-M01
Nom d'Examen: Alcatel-Lucent (Alcatel-Lucent IP/MPLS Mobile Backhaul Transport)
Questions et réponses: 150 Q&As

Choisissez le Pass4Test, choisissez le succès. Le produit offert par Pass4Test vous permet à réussir le test Alcatel-Lucent 4A0-M01. C'est necessaire de prendre un test simulation avant participer le test réel. C'est une façon bien effective. Choisir Pass4Test vous permet à réussir 100% le test.

4A0-M01 Démo gratuit à télécharger: http://www.pass4test.fr/4A0-M01.html

NO.1 Click on the exhibit.
Given the show command results shown:
With what IEEE 1588v2/Precision Time Protocol (PTP) v2 message did the slave node set the Unicast
message rates used by the master?
A. Announce granted
B. Announce request
C. Sync granted
D. Sync request
Answer: B

Alcatel-Lucent examen   4A0-M01   4A0-M01 examen   4A0-M01   certification 4A0-M01

NO.2 Which statement best describes adaptive timing techniques?
A. Adaptive timing calculates the time of day from time stamped packets
B. Adaptive timing calculates the time of day from the arriving packet rate
C. Adaptive timing only supports frequency synchronization
D. Adaptive timing only operates on point-to-point links
Answer: A

Alcatel-Lucent   4A0-M01   4A0-M01 examen   4A0-M01

NO.3 Which timing technique can deliver time of day and phase synchronization information to the base
station without concern for Packet Delay Variation (PDV)?
A. Building Integrated Timing Supply (BITS)
B. Global Positioning System (GPS)
C. Adaptive Clock Recovery (ACR)
D. IEEE 1588v2/Precision Time Protocol (PTP)
Answer: B

certification Alcatel-Lucent   4A0-M01 examen   certification 4A0-M01

NO.4 Click on the exhibit.
Consider the topology and MLS1 configuration shown, and given the following conditions:
* MLS1 delivers the PRC traceable clock to the network
* Reference 1 receives Quality Level (QL) - EEC1
* Reference 2 receives QL - SSU-A
* BITS sets QL-SSU-B
Which quality level will MLS1 deliver to POC2-1 on its Synchronous Ethernet (SyncE) port 1/2/7?
A. QL-EEC1
B. QL-PRC
C. QL-SSU-A
D. QL-STU
Answer: B

Alcatel-Lucent   4A0-M01   4A0-M01 examen   4A0-M01

NO.5 When researching carrier-class Ethernet standards to support the mobile backhaul Ethernet transport,
which standards body would you consult?
A. IEEE
B. MEF
C. ITU-T
D. NGMN
Answer: B

Alcatel-Lucent   certification 4A0-M01   4A0-M01   4A0-M01   4A0-M01 examen

NO.6 In the Alcatel-Lucent SROS, which command creates the OC-3 path's Administrative Unit (AU)-4 Virtual
Container (VC) capacity?
A. configure port 3/1/2 sonet-sdh path au-4
B. configure port 3/1/2 sonet-sdh path sts3
C. configure port 3/1/2 sonet-sdh path tug-3
D. configure port 3/1/2 sonet-sdh path vc-4
Answer: B

Alcatel-Lucent   4A0-M01   4A0-M01 examen

NO.7 Which synchronization technique supports time of day and phase synchronization?
A. IEEE 1588 v2/Precision Time Protocol (PTP)v2
B. Adaptive Clock Recovery (ACR)
C. Time Division Multiplexing (TDM) line timing
D. Synchronization Ethernet (SyncE)/Synchronization Status Message (SSM)
Answer: A

Alcatel-Lucent examen   4A0-M01 examen   4A0-M01 examen   certification 4A0-M01

NO.8 Which statement correctly describes the Point-to-Point (PPP) Multilink Protocol (MP) negotiation
process?
A. At least one link must complete Link Control Protocol (LCP) negotiations before the bundle can
initialize
B. The endpoints indicate their desire to implement MP in the link Network Control Protocol (NCP) phase
C. The bundle must complete LCP negotiations before it can enter the NCP negotiation phase
D. Internet Protocol-Control Protocol (IPCP) negotiations must succeed for the bundle links to initialize
Answer: A

Alcatel-Lucent   4A0-M01   4A0-M01   4A0-M01 examen

NO.9 If an IEEE 1588v2/Precision Time Protocol (PTP) v2 slave times out announce messages with the
master, to which state does the slave port transition to choose another potential master?
A. Initial
B. Listening
C. Passive
D. Un-calibrated
Answer: B

Alcatel-Lucent   certification 4A0-M01   4A0-M01   certification 4A0-M01   4A0-M01 examen

NO.10 Click on the exhibit.
On the OC-3 port, each provisioned channel group contains all available timeslots
The command result illustrates which OC-3 port characteristic?
A. On STS1-1,the second VT1.5 in the second VTG is set for IPCP encapsulation
B. On STS1-1,the second DS1 channel group in the second VTG isoperationallyup
C. On STS1-1, the second E1 channel group in the second TUG-2 is operationally up
D. On STS1-1, the second VT2 in the second TUG-2 is set for IPCP encapsulation
Answer: C

Alcatel-Lucent   4A0-M01   4A0-M01   4A0-M01 examen

NO.11 In the Alcatel-Lucent SROS, which payload type set in a SDH-framed OC-12 port creates individual E1
containers?
A. Virtual Tributary (VT) 1.5
B. VT2
C. Virtual Container (VC)-11
D. VC-12
Answer: B

Alcatel-Lucent examen   4A0-M01 examen   4A0-M01 examen   certification 4A0-M01

NO.12 Which messages, periodically sent between an IEEE 1588v2/Precision Time Protocol (PTP) v2 master
and slave, serve as hellos to help the slave choose the best available master?
A. Announce
B. Announce_grant
C. Sync
D. Delay_response
Answer: A

Alcatel-Lucent   certification 4A0-M01   4A0-M01 examen   4A0-M01

NO.13 Click on the exhibit.
Given the following:
On the OC-3 port, each provisioned channel group contains all available timeslots.
The command result illustrates which circuit status?
A. The E1 channel group is administratively turned down
B. The DS1 circuit physical link is operationally down
C. The IMA bundle has no operational member links
D. The associated Layer 3 interface is operationallydown
Answer: B

Alcatel-Lucent   4A0-M01   4A0-M01 examen   certification 4A0-M01   certification 4A0-M01

NO.14 Click on the exhibit.
Given the configuration shown and the following conditions:
* The external reference is offline
* Reference 1 receives Quality Level (QL) - EEC1
* Reference 2 receives QL - SSU-A
Which quality level will the SAR router advertise to its Synchronous Ethernet (SyncE) peers?
A. QL-DNU
B. QL-EEC1
C. QL-SSU-A
D. QL-PRC
E. QL-UNC
Answer: B

certification Alcatel-Lucent   4A0-M01   4A0-M01

NO.15 An SROS router obtains its timing exclusively from its BITS input port. The router sets Quality Level
(QL) SONET Traceability Unknown (STU) on this Superframe (SF) framed DS1 BITS reference.
What must you configure on this master router to pass the best clock quality level to the downstream
Synchronous Ethernet (SyncE) slave nodes while maintaining traceability to the DS1 source?
A. Enable "ql-override prs" on the BITS reference
B. Enable "ql-override prs" on the master's SyncE ports
C. Enable "ql-selection prs" on the BITS reference
D. Set the master router to choose its source by quality level
Answer: A

Alcatel-Lucent   4A0-M01   4A0-M01 examen   4A0-M01 examen   4A0-M01 examen   4A0-M01 examen

NO.16 Which is a characteristic of the IEEE 802.3 Slow Protocol?
A. There are a maximum of 10 frames transmitted per second
B. There are a maximum of 20 slow protocol subtypes per interface
C. The maximum slow protocol frame size is 64 bytes
D. The slow protocol header carries the clock quality level
Answer: A

Alcatel-Lucent examen   certification 4A0-M01   4A0-M01   4A0-M01

NO.17 Click on the exhibit.
The command result indicates which condition on the Inverse Multiplexing over ATM (IMA) bundle?
A. The number of active links has dropped belowthe minimum threshold
B. The associated Layer 3 interface is administratively down
C. The remote IMA bundle is administrativelydown
D. The parent OC-3 is operationally down
Answer: C

Alcatel-Lucent   4A0-M01   4A0-M01   4A0-M01

NO.18 Click on the exhibit.
Consider the topology and MLS1 configuration shown, and given the following conditions:
-MLS1 delivers the PRC traceable clock to the network
-Reference 1 receives Quality Level (QL) - ST3
-Reference 2 receives QL - DUS
-BITS sets QL-STU
Which quality level will MLS1 deliver to POC2-1 on its Synchronous Ethernet (SyncE) port 1/2/7?
A. QL-EEC2
B. QL-PRS
C. QL-ST3
D. QL-STU
Answer: C

certification Alcatel-Lucent   4A0-M01   certification 4A0-M01

NO.19 The IETF is know for which standardization effort.?
A. It develops recommendations for core network functionality, broadband service delivery and next
generation services
B. It maintains Requests for Comment (RFC) that describe technical solutions to Internet challenges
C. It creates single, integrated network design guidelines to support mobile broadband services
D. It develops radio access services and systems for high capacity mobile networks
Answer: B

Alcatel-Lucent   4A0-M01   4A0-M01 examen   4A0-M01   4A0-M01

NO.20 Click on the exhibit.
Given the show command results shown:
Which IEEE 1588v2/Precision Time Protocol (PTP) v2 parent clock value does the slave first consider
when choosing its master?
A. GM Clock Priority1
B. GM Clock ID
C. GM Clock Priority2
D. GM Clock Class
Answer: D

certification Alcatel-Lucent   certification 4A0-M01   certification 4A0-M01   4A0-M01   4A0-M01 examen   4A0-M01

Le succès n'est pas loin de vous si vous choisissez Pass4Test. Vous allez obtenir le Certificat de Alcatel-Lucent 4A0-M01 très tôt. Pass4Test peut vous permettre à réussir 100% le test Alcatel-Lucent 4A0-M01, de plus, un an de service en ligne après vendre est aussi gratuit pour vous.

2013年9月1日星期日

Pass4Test offre une formation sur Alcatel-Lucent 4A0-M01 matériaux examen

Dans cette société bien intense, c'est avantage si quelque'un a une technique particulère, donc c'est pourquoi beaucoup de gens ont envie de dépnenser les efforts et le temps à préparer le test Alcatel-Lucent 4A0-M01, mais ils ne peuvaient pas réussir finalement. C'est juste parce que ils ont pas bien choisi une bonne formation. L'outil de formation lancé par les experts de Pass4Test vous permet à passer le test Alcatel-Lucent 4A0-M01 coûtant un peu d'argent.

On peut voir que beaucoup de candidats ratent le test Alcatel-Lucent 4A0-M01 quand même avec l'effort et beaucoup de temps dépensés. Cest une bonne preuve que le test Alcatel-Lucent 4A0-M01 est difficile à réussir. Pass4Test offre le guide d'étude bien fiable. Sauf le test Alcatel-Lucent 4A0-M01, Pass4Test peut offrir les Q&As des autres test Certification IT.

Pass4Test est un site particulier d'offrir la formation à propos de test Certification IT. C'est un bon choix pour vous aider à réussir le test Alcatel-Lucent 4A0-M01. Pass4Test offre toutes les informations et les documentations plus nouvelles qui peut vous donner plus de chances à réussir le test.

Code d'Examen: 4A0-M01
Nom d'Examen: Alcatel-Lucent (Alcatel-Lucent IP/MPLS Mobile Backhaul Transport)
Questions et réponses: 150 Q&As

Pass4Test est un site particulier à offrir les guides de formation à propos de test certificat IT. La version plus nouvelle de Q&A Alcatel-Lucent 4A0-M01 peut répondre sûrement une grande demande des candidats. Comme tout le monde le connait, le certificat Alcatel-Lucent 4A0-M01 est un point important pendant l'interview dans les grandes entreprises IT. Ça peut expliquer un pourquoi ce test est si populaire. En même temps, Pass4Test est connu par tout le monde. Choisir le Pass4Test, choisir le succès. Votre argent sera tout rendu si malheureusement vous ne passe pas le test Alcatel-Lucent 4A0-M01.

Le Pass4Test est un site qui peut offrir les facilités aux candidats et aider les candidats à réaliser leurs rêve. Si vous êtes souci de votre test Certification, Pass4Test peut vous rendre heureux. La haute précision et la grande couverture de la Q&A de Pass4Test vous aidera pendant la préparation de test. Vous n'aurez aucune raison de regretter parce que Pass4Test réalisera votre rêve.

4A0-M01 Démo gratuit à télécharger: http://www.pass4test.fr/4A0-M01.html

NO.1 Click on the exhibit.
Given the configuration shown and the following conditions:
* The external reference is offline
* Reference 1 receives Quality Level (QL) - EEC1
* Reference 2 receives QL - SSU-A
Which quality level will the SAR router advertise to its Synchronous Ethernet (SyncE) peers?
A. QL-DNU
B. QL-EEC1
C. QL-SSU-A
D. QL-PRC
E. QL-UNC
Answer: B

certification Alcatel-Lucent   4A0-M01 examen   4A0-M01 examen   4A0-M01   4A0-M01 examen

NO.2 Click on the exhibit.
The command result indicates which condition on the Inverse Multiplexing over ATM (IMA) bundle?
A. The number of active links has dropped belowthe minimum threshold
B. The associated Layer 3 interface is administratively down
C. The remote IMA bundle is administrativelydown
D. The parent OC-3 is operationally down
Answer: C

Alcatel-Lucent   4A0-M01   4A0-M01

NO.3 Click on the exhibit.
Consider the topology and MLS1 configuration shown, and given the following conditions:
-MLS1 delivers the PRC traceable clock to the network
-Reference 1 receives Quality Level (QL) - ST3
-Reference 2 receives QL - DUS
-BITS sets QL-STU
Which quality level will MLS1 deliver to POC2-1 on its Synchronous Ethernet (SyncE) port 1/2/7?
A. QL-EEC2
B. QL-PRS
C. QL-ST3
D. QL-STU
Answer: C

certification Alcatel-Lucent   4A0-M01   certification 4A0-M01   4A0-M01 examen

NO.4 Which is a characteristic of the IEEE 802.3 Slow Protocol?
A. There are a maximum of 10 frames transmitted per second
B. There are a maximum of 20 slow protocol subtypes per interface
C. The maximum slow protocol frame size is 64 bytes
D. The slow protocol header carries the clock quality level
Answer: A

Alcatel-Lucent   4A0-M01   4A0-M01 examen   4A0-M01

NO.5 Which messages, periodically sent between an IEEE 1588v2/Precision Time Protocol (PTP) v2 master
and slave, serve as hellos to help the slave choose the best available master?
A. Announce
B. Announce_grant
C. Sync
D. Delay_response
Answer: A

Alcatel-Lucent examen   4A0-M01   certification 4A0-M01   4A0-M01   certification 4A0-M01   4A0-M01

NO.6 Which statement correctly describes the Point-to-Point (PPP) Multilink Protocol (MP) negotiation
process?
A. At least one link must complete Link Control Protocol (LCP) negotiations before the bundle can
initialize
B. The endpoints indicate their desire to implement MP in the link Network Control Protocol (NCP) phase
C. The bundle must complete LCP negotiations before it can enter the NCP negotiation phase
D. Internet Protocol-Control Protocol (IPCP) negotiations must succeed for the bundle links to initialize
Answer: A

Alcatel-Lucent examen   certification 4A0-M01   certification 4A0-M01   4A0-M01 examen   4A0-M01

NO.7 Click on the exhibit.
Given the show command results shown:
With what IEEE 1588v2/Precision Time Protocol (PTP) v2 message did the slave node set the Unicast
message rates used by the master?
A. Announce granted
B. Announce request
C. Sync granted
D. Sync request
Answer: B

certification Alcatel-Lucent   4A0-M01   4A0-M01

NO.8 Which statement best describes adaptive timing techniques?
A. Adaptive timing calculates the time of day from time stamped packets
B. Adaptive timing calculates the time of day from the arriving packet rate
C. Adaptive timing only supports frequency synchronization
D. Adaptive timing only operates on point-to-point links
Answer: A

Alcatel-Lucent examen   4A0-M01   4A0-M01   4A0-M01

NO.9 An SROS router obtains its timing exclusively from its BITS input port. The router sets Quality Level
(QL) SONET Traceability Unknown (STU) on this Superframe (SF) framed DS1 BITS reference.
What must you configure on this master router to pass the best clock quality level to the downstream
Synchronous Ethernet (SyncE) slave nodes while maintaining traceability to the DS1 source?
A. Enable "ql-override prs" on the BITS reference
B. Enable "ql-override prs" on the master's SyncE ports
C. Enable "ql-selection prs" on the BITS reference
D. Set the master router to choose its source by quality level
Answer: A

Alcatel-Lucent examen   4A0-M01   certification 4A0-M01   4A0-M01   certification 4A0-M01

NO.10 Click on the exhibit.
On the OC-3 port, each provisioned channel group contains all available timeslots
The command result illustrates which OC-3 port characteristic?
A. On STS1-1,the second VT1.5 in the second VTG is set for IPCP encapsulation
B. On STS1-1,the second DS1 channel group in the second VTG isoperationallyup
C. On STS1-1, the second E1 channel group in the second TUG-2 is operationally up
D. On STS1-1, the second VT2 in the second TUG-2 is set for IPCP encapsulation
Answer: C

Alcatel-Lucent   4A0-M01 examen   4A0-M01

NO.11 The IETF is know for which standardization effort.?
A. It develops recommendations for core network functionality, broadband service delivery and next
generation services
B. It maintains Requests for Comment (RFC) that describe technical solutions to Internet challenges
C. It creates single, integrated network design guidelines to support mobile broadband services
D. It develops radio access services and systems for high capacity mobile networks
Answer: B

Alcatel-Lucent   4A0-M01   certification 4A0-M01

NO.12 If an IEEE 1588v2/Precision Time Protocol (PTP) v2 slave times out announce messages with the
master, to which state does the slave port transition to choose another potential master?
A. Initial
B. Listening
C. Passive
D. Un-calibrated
Answer: B

Alcatel-Lucent   4A0-M01 examen   4A0-M01   certification 4A0-M01

NO.13 Click on the exhibit.
Given the following:
On the OC-3 port, each provisioned channel group contains all available timeslots.
The command result illustrates which circuit status?
A. The E1 channel group is administratively turned down
B. The DS1 circuit physical link is operationally down
C. The IMA bundle has no operational member links
D. The associated Layer 3 interface is operationallydown
Answer: B

Alcatel-Lucent   4A0-M01 examen   certification 4A0-M01   certification 4A0-M01

NO.14 Click on the exhibit.
Given the show command results shown:
Which IEEE 1588v2/Precision Time Protocol (PTP) v2 parent clock value does the slave first consider
when choosing its master?
A. GM Clock Priority1
B. GM Clock ID
C. GM Clock Priority2
D. GM Clock Class
Answer: D

Alcatel-Lucent   4A0-M01   4A0-M01 examen   4A0-M01

NO.15 Which timing technique can deliver time of day and phase synchronization information to the base
station without concern for Packet Delay Variation (PDV)?
A. Building Integrated Timing Supply (BITS)
B. Global Positioning System (GPS)
C. Adaptive Clock Recovery (ACR)
D. IEEE 1588v2/Precision Time Protocol (PTP)
Answer: B

certification Alcatel-Lucent   certification 4A0-M01   4A0-M01

NO.16 In the Alcatel-Lucent SROS, which command creates the OC-3 path's Administrative Unit (AU)-4 Virtual
Container (VC) capacity?
A. configure port 3/1/2 sonet-sdh path au-4
B. configure port 3/1/2 sonet-sdh path sts3
C. configure port 3/1/2 sonet-sdh path tug-3
D. configure port 3/1/2 sonet-sdh path vc-4
Answer: B

Alcatel-Lucent examen   4A0-M01   certification 4A0-M01   certification 4A0-M01

NO.17 Which synchronization technique supports time of day and phase synchronization?
A. IEEE 1588 v2/Precision Time Protocol (PTP)v2
B. Adaptive Clock Recovery (ACR)
C. Time Division Multiplexing (TDM) line timing
D. Synchronization Ethernet (SyncE)/Synchronization Status Message (SSM)
Answer: A

Alcatel-Lucent   4A0-M01   4A0-M01   certification 4A0-M01   4A0-M01 examen

NO.18 In the Alcatel-Lucent SROS, which payload type set in a SDH-framed OC-12 port creates individual E1
containers?
A. Virtual Tributary (VT) 1.5
B. VT2
C. Virtual Container (VC)-11
D. VC-12
Answer: B

Alcatel-Lucent   4A0-M01   4A0-M01

NO.19 When researching carrier-class Ethernet standards to support the mobile backhaul Ethernet transport,
which standards body would you consult?
A. IEEE
B. MEF
C. ITU-T
D. NGMN
Answer: B

Alcatel-Lucent   certification 4A0-M01   4A0-M01 examen   4A0-M01   4A0-M01

NO.20 Click on the exhibit.
Consider the topology and MLS1 configuration shown, and given the following conditions:
* MLS1 delivers the PRC traceable clock to the network
* Reference 1 receives Quality Level (QL) - EEC1
* Reference 2 receives QL - SSU-A
* BITS sets QL-SSU-B
Which quality level will MLS1 deliver to POC2-1 on its Synchronous Ethernet (SyncE) port 1/2/7?
A. QL-EEC1
B. QL-PRC
C. QL-SSU-A
D. QL-STU
Answer: B

Alcatel-Lucent   4A0-M01 examen   4A0-M01 examen   4A0-M01

Pass4Test est un site à offrir particulièrement la Q&A Alcatel-Lucent 4A0-M01, vous pouvez non seulement aprrendre plus de connaissances professionnelles, et encore obtenir le Passport de Certification Alcatel-Lucent 4A0-M01, et trouver un meilleur travail plus tard. Les documentations offertes par Pass4Test sont tout étudiés par les experts de Pass4Test en profitant leurs connaissances et expériences, ces Q&As sont impresionnées par une bonne qualité. Il ne faut que choisir Pass4Test, vous pouvez non seulement passer le test Alcatel-Lucent 4A0-M01 et même se renforcer vos connaissances professionnelles IT.

2013年7月31日星期三

Le dernier examen Alcatel-Lucent 4A0-M01 gratuit Télécharger

Dans cette société bien intense, c'est avantage si quelque'un a une technique particulère, donc c'est pourquoi beaucoup de gens ont envie de dépnenser les efforts et le temps à préparer le test Alcatel-Lucent 4A0-M01, mais ils ne peuvaient pas réussir finalement. C'est juste parce que ils ont pas bien choisi une bonne formation. L'outil de formation lancé par les experts de Pass4Test vous permet à passer le test Alcatel-Lucent 4A0-M01 coûtant un peu d'argent.


Aujourd'hui, c'est une société pleine de gens talentueux, la meilleure façon de suivre et assurer la place dans votre carrière est de s'améliorer sans arrêt. Si vous n'augmentez pas dans votre carrière, vous êtes juste sous-développé parce que les autres sont meilleurs que vous. Pour éviter ce cas, vous devez vous former successivement.


Si vous voulez se prouver une compétition et s'enraciner le statut dans l'industrie IT à travers de test Certification Alcatel-Lucent 4A0-M01, c'est obligatoire que vous devez avior les connaissances professionnelles. Mais il demande pas mal de travaux à passer le test Certification Alcatel-Lucent 4A0-M01. Peut-être d'obtenir le Certificat Alcatel-Lucent 4A0-M01 peut promouvoir le tremplin vers l'Industrie IT, mais vous n'avez pas besoin de travailler autant dur à préparer le test. Vous avez un autre choix à faire toutes les choses plus facile : prendre le produit de Pass4Test comme vos matériaux avec qui vous vous pratiquez avant le test réel. La Q&A de Pass4Test est recherchée particulièrement pour le test IT.


Aujoud'hui, dans cette indutrie IT de plus en plus concurrentiel, le Certificat de Alcatel-Lucent 4A0-M01 peut bien prouver que vous avez une bonne concurrence et une space professionnelle plus grande à atteindre. Dans le site Pass4Test, vous pouvez trouver un outil de se former très pratique. Nos IT experts vous offrent les Q&As précises et détaillées pour faciliter votre cours de préparer le test Alcatel-Lucent 4A0-M01 qui vous amenera le succès du test Alcatel-Lucent 4A0-M01, au lieu de traivailler avec peine et sans résultat.


La solution offerte par Pass4Test comprenant un test simulation bien proche de test réel Alcatel-Lucent 4A0-M01 peut vous assurer à réussir 100% le test Alcatel-Lucent 4A0-M01. D'ailleur, le service de la mise à jour gratuite est aussi pour vous. Maintenant, vous pouvez télécharger le démo gratuit pour prendre un essai.


Choisir le produit fait avec tous efforts des experts de Pass4Test vous permet à réussir 100% le test Certification IT. Le produit de Pass4Test est bien certifié par les spécialistes dans l'Industrie IT. La haute qualité du produit Pass4Test ne vous demande que 20 heures pour préparer, et vous allez réussir le test Alcatel-Lucent 4A0-M01 à la première fois. Vous ne refuserez jamais pour le choix de Pass4Test, parce qu'il symbole le succès.


Code d'Examen: 4A0-M01

Nom d'Examen: Alcatel-Lucent (Alcatel-Lucent IP/MPLS Mobile Backhaul Transport)

Questions et réponses: 150 Q&As

4A0-M01 Démo gratuit à télécharger: http://www.pass4test.fr/4A0-M01.html


NO.1 Which is a characteristic of the IEEE 802.3 Slow Protocol?
A. There are a maximum of 10 frames transmitted per second
B. There are a maximum of 20 slow protocol subtypes per interface
C. The maximum slow protocol frame size is 64 bytes
D. The slow protocol header carries the clock quality level
Answer: A

Alcatel-Lucent   4A0-M01   4A0-M01   4A0-M01

NO.2 Click on the exhibit.
The command result indicates which condition on the Inverse Multiplexing over ATM (IMA) bundle?
A. The number of active links has dropped belowthe minimum threshold
B. The associated Layer 3 interface is administratively down
C. The remote IMA bundle is administrativelydown
D. The parent OC-3 is operationally down
Answer: C

Alcatel-Lucent   4A0-M01 examen   4A0-M01

NO.3 Click on the exhibit.
Given the configuration shown and the following conditions:
* The external reference is offline
* Reference 1 receives Quality Level (QL) - EEC1
* Reference 2 receives QL - SSU-A
Which quality level will the SAR router advertise to its Synchronous Ethernet (SyncE) peers?
A. QL-DNU
B. QL-EEC1
C. QL-SSU-A
D. QL-PRC
E. QL-UNC
Answer: B

Alcatel-Lucent   4A0-M01 examen   4A0-M01   certification 4A0-M01   4A0-M01

NO.4 Which synchronization technique supports time of day and phase synchronization?
A. IEEE 1588 v2/Precision Time Protocol (PTP)v2
B. Adaptive Clock Recovery (ACR)
C. Time Division Multiplexing (TDM) line timing
D. Synchronization Ethernet (SyncE)/Synchronization Status Message (SSM)
Answer: A

Alcatel-Lucent   4A0-M01 examen   certification 4A0-M01   4A0-M01 examen   certification 4A0-M01

NO.5 Click on the exhibit.
Given the show command results shown:
Which IEEE 1588v2/Precision Time Protocol (PTP) v2 parent clock value does the slave first consider
when choosing its master?
A. GM Clock Priority1
B. GM Clock ID
C. GM Clock Priority2
D. GM Clock Class
Answer: D

Alcatel-Lucent   4A0-M01 examen   certification 4A0-M01   4A0-M01   4A0-M01

NO.6 When researching carrier-class Ethernet standards to support the mobile backhaul Ethernet transport,
which standards body would you consult?
A. IEEE
B. MEF
C. ITU-T
D. NGMN
Answer: B

Alcatel-Lucent   4A0-M01   4A0-M01   4A0-M01   4A0-M01 examen

NO.7 Click on the exhibit.
Consider the topology and MLS1 configuration shown, and given the following conditions:
-MLS1 delivers the PRC traceable clock to the network
-Reference 1 receives Quality Level (QL) - ST3
-Reference 2 receives QL - DUS
-BITS sets QL-STU
Which quality level will MLS1 deliver to POC2-1 on its Synchronous Ethernet (SyncE) port 1/2/7?
A. QL-EEC2
B. QL-PRS
C. QL-ST3
D. QL-STU
Answer: C

certification Alcatel-Lucent   certification 4A0-M01   4A0-M01

NO.8 Click on the exhibit.
Given the show command results shown:
With what IEEE 1588v2/Precision Time Protocol (PTP) v2 message did the slave node set the Unicast
message rates used by the master?
A. Announce granted
B. Announce request
C. Sync granted
D. Sync request
Answer: B

Alcatel-Lucent examen   4A0-M01   4A0-M01 examen   4A0-M01   4A0-M01 examen   4A0-M01

NO.9 Which statement best describes adaptive timing techniques?
A. Adaptive timing calculates the time of day from time stamped packets
B. Adaptive timing calculates the time of day from the arriving packet rate
C. Adaptive timing only supports frequency synchronization
D. Adaptive timing only operates on point-to-point links
Answer: A

Alcatel-Lucent   4A0-M01 examen   4A0-M01

NO.10 Which timing technique can deliver time of day and phase synchronization information to the base
station without concern for Packet Delay Variation (PDV)?
A. Building Integrated Timing Supply (BITS)
B. Global Positioning System (GPS)
C. Adaptive Clock Recovery (ACR)
D. IEEE 1588v2/Precision Time Protocol (PTP)
Answer: B

certification Alcatel-Lucent   4A0-M01   4A0-M01 examen

NO.11 If an IEEE 1588v2/Precision Time Protocol (PTP) v2 slave times out announce messages with the
master, to which state does the slave port transition to choose another potential master?
A. Initial
B. Listening
C. Passive
D. Un-calibrated
Answer: B

Alcatel-Lucent   certification 4A0-M01   4A0-M01 examen   4A0-M01   certification 4A0-M01

NO.12 In the Alcatel-Lucent SROS, which payload type set in a SDH-framed OC-12 port creates individual E1
containers?
A. Virtual Tributary (VT) 1.5
B. VT2
C. Virtual Container (VC)-11
D. VC-12
Answer: B

Alcatel-Lucent examen   4A0-M01   4A0-M01 examen   4A0-M01

NO.13 The IETF is know for which standardization effort.?
A. It develops recommendations for core network functionality, broadband service delivery and next
generation services
B. It maintains Requests for Comment (RFC) that describe technical solutions to Internet challenges
C. It creates single, integrated network design guidelines to support mobile broadband services
D. It develops radio access services and systems for high capacity mobile networks
Answer: B

Alcatel-Lucent   4A0-M01   certification 4A0-M01   certification 4A0-M01   4A0-M01

NO.14 Click on the exhibit.
Consider the topology and MLS1 configuration shown, and given the following conditions:
* MLS1 delivers the PRC traceable clock to the network
* Reference 1 receives Quality Level (QL) - EEC1
* Reference 2 receives QL - SSU-A
* BITS sets QL-SSU-B
Which quality level will MLS1 deliver to POC2-1 on its Synchronous Ethernet (SyncE) port 1/2/7?
A. QL-EEC1
B. QL-PRC
C. QL-SSU-A
D. QL-STU
Answer: B

certification Alcatel-Lucent   4A0-M01   4A0-M01

NO.15 Click on the exhibit.
Given the following:
On the OC-3 port, each provisioned channel group contains all available timeslots.
The command result illustrates which circuit status?
A. The E1 channel group is administratively turned down
B. The DS1 circuit physical link is operationally down
C. The IMA bundle has no operational member links
D. The associated Layer 3 interface is operationallydown
Answer: B

certification Alcatel-Lucent   4A0-M01 examen   4A0-M01   certification 4A0-M01   certification 4A0-M01

NO.16 In the Alcatel-Lucent SROS, which command creates the OC-3 path's Administrative Unit (AU)-4 Virtual
Container (VC) capacity?
A. configure port 3/1/2 sonet-sdh path au-4
B. configure port 3/1/2 sonet-sdh path sts3
C. configure port 3/1/2 sonet-sdh path tug-3
D. configure port 3/1/2 sonet-sdh path vc-4
Answer: B

Alcatel-Lucent examen   certification 4A0-M01   certification 4A0-M01   4A0-M01   4A0-M01

NO.17 Which statement correctly describes the Point-to-Point (PPP) Multilink Protocol (MP) negotiation
process?
A. At least one link must complete Link Control Protocol (LCP) negotiations before the bundle can
initialize
B. The endpoints indicate their desire to implement MP in the link Network Control Protocol (NCP) phase
C. The bundle must complete LCP negotiations before it can enter the NCP negotiation phase
D. Internet Protocol-Control Protocol (IPCP) negotiations must succeed for the bundle links to initialize
Answer: A

certification Alcatel-Lucent   certification 4A0-M01   certification 4A0-M01

NO.18 An SROS router obtains its timing exclusively from its BITS input port. The router sets Quality Level
(QL) SONET Traceability Unknown (STU) on this Superframe (SF) framed DS1 BITS reference.
What must you configure on this master router to pass the best clock quality level to the downstream
Synchronous Ethernet (SyncE) slave nodes while maintaining traceability to the DS1 source?
A. Enable "ql-override prs" on the BITS reference
B. Enable "ql-override prs" on the master's SyncE ports
C. Enable "ql-selection prs" on the BITS reference
D. Set the master router to choose its source by quality level
Answer: A

certification Alcatel-Lucent   4A0-M01   certification 4A0-M01   4A0-M01 examen

NO.19 Click on the exhibit.
On the OC-3 port, each provisioned channel group contains all available timeslots
The command result illustrates which OC-3 port characteristic?
A. On STS1-1,the second VT1.5 in the second VTG is set for IPCP encapsulation
B. On STS1-1,the second DS1 channel group in the second VTG isoperationallyup
C. On STS1-1, the second E1 channel group in the second TUG-2 is operationally up
D. On STS1-1, the second VT2 in the second TUG-2 is set for IPCP encapsulation
Answer: C

Alcatel-Lucent   4A0-M01   4A0-M01

NO.20 Which messages, periodically sent between an IEEE 1588v2/Precision Time Protocol (PTP) v2 master
and slave, serve as hellos to help the slave choose the best available master?
A. Announce
B. Announce_grant
C. Sync
D. Delay_response
Answer: A

Alcatel-Lucent   4A0-M01   4A0-M01   4A0-M01 examen

Vous allez choisir Pass4Test après essayer une partie de Q&A Alcatel-Lucent 4A0-M01 (gratuit à télécharger). Le guide d'étude produit par Pass4Test est une assurance 100% à vous aider à réussir le test Certification Alcatel-Lucent 4A0-M01.


2013年7月26日星期五

Alcatel-Lucent 4A0-M01 examen pratique questions et réponses

Pass4Test est un fournisseur de formation pour une courte terme, et Pass4Test peut vous assurer le succès de test Alcatel-Lucent 4A0-M01. Si malheureusement, vous échouez le test, votre argent sera tout rendu. Vous pouvez télécharger le démo gratuit avant de choisir Pass4Test. Au moment là, vous serez confiant sur Pass4Test.


Choisissez le Pass4Test, choisissez le succès. Le produit offert par Pass4Test vous permet à réussir le test Alcatel-Lucent 4A0-M01. C'est necessaire de prendre un test simulation avant participer le test réel. C'est une façon bien effective. Choisir Pass4Test vous permet à réussir 100% le test.


Pour l'instant, vous pouvez télécharger le démo gratuit de Q&A Alcatel-Lucent 4A0-M01 dans Pass4Test pour se former avant le test Alcatel-Lucent 4A0-M01.


Code d'Examen: 4A0-M01

Nom d'Examen: Alcatel-Lucent (Alcatel-Lucent IP/MPLS Mobile Backhaul Transport)

Questions et réponses: 150 Q&As

Est-que vous s'inquiétez encore à passer le test Certification 4A0-M01 qui demande beaucoup d'efforts? Est-que vous travaillez nuit et jour juste pour préparer le test de Alcatel-Lucent 4A0-M01? Si vous voulez réussir le test Alcatel-Lucent 4A0-M01 plus facilement? N'hésitez plus à nous choisir. Pass4Test vous aidera à réaliser votre rêve.


On peut voir que beaucoup de candidats ratent le test Alcatel-Lucent 4A0-M01 quand même avec l'effort et beaucoup de temps dépensés. Cest une bonne preuve que le test Alcatel-Lucent 4A0-M01 est difficile à réussir. Pass4Test offre le guide d'étude bien fiable. Sauf le test Alcatel-Lucent 4A0-M01, Pass4Test peut offrir les Q&As des autres test Certification IT.


Pass4Test a une équipe se composant des experts qui font la recherche particulièrement des exercices et des Q&As pour le test certification Alcatel-Lucent 4A0-M01, d'ailleurs ils peuvent vous proposer à propos de choisir l'outil de se former en ligne. Si vous avez envie d'acheter une Q&A de Pass4Test, Pass4Test vous offrira de matériaux plus détailés et plus nouveaux pour vous aider à approcher au maximum le test réel. Assurez-vous de choisir le Pass4Test, vous réussirez 100% le test Alcatel-Lucent 4A0-M01.


4A0-M01 Démo gratuit à télécharger: http://www.pass4test.fr/4A0-M01.html


NO.1 If an IEEE 1588v2/Precision Time Protocol (PTP) v2 slave times out announce messages with the
master, to which state does the slave port transition to choose another potential master?
A. Initial
B. Listening
C. Passive
D. Un-calibrated
Answer: B

Alcatel-Lucent examen   4A0-M01   4A0-M01 examen   certification 4A0-M01

NO.2 Click on the exhibit.
Consider the topology and MLS1 configuration shown, and given the following conditions:
-MLS1 delivers the PRC traceable clock to the network
-Reference 1 receives Quality Level (QL) - ST3
-Reference 2 receives QL - DUS
-BITS sets QL-STU
Which quality level will MLS1 deliver to POC2-1 on its Synchronous Ethernet (SyncE) port 1/2/7?
A. QL-EEC2
B. QL-PRS
C. QL-ST3
D. QL-STU
Answer: C

Alcatel-Lucent   4A0-M01   4A0-M01   4A0-M01

NO.3 Which is a characteristic of the IEEE 802.3 Slow Protocol?
A. There are a maximum of 10 frames transmitted per second
B. There are a maximum of 20 slow protocol subtypes per interface
C. The maximum slow protocol frame size is 64 bytes
D. The slow protocol header carries the clock quality level
Answer: A

certification Alcatel-Lucent   4A0-M01   4A0-M01 examen   4A0-M01   certification 4A0-M01

NO.4 Click on the exhibit.
The command result indicates which condition on the Inverse Multiplexing over ATM (IMA) bundle?
A. The number of active links has dropped belowthe minimum threshold
B. The associated Layer 3 interface is administratively down
C. The remote IMA bundle is administrativelydown
D. The parent OC-3 is operationally down
Answer: C

Alcatel-Lucent   4A0-M01 examen   certification 4A0-M01   4A0-M01

NO.5 Click on the exhibit.
Given the show command results shown:
With what IEEE 1588v2/Precision Time Protocol (PTP) v2 message did the slave node set the Unicast
message rates used by the master?
A. Announce granted
B. Announce request
C. Sync granted
D. Sync request
Answer: B

Alcatel-Lucent   4A0-M01   4A0-M01 examen   4A0-M01 examen   certification 4A0-M01

NO.6 Click on the exhibit.
Consider the topology and MLS1 configuration shown, and given the following conditions:
* MLS1 delivers the PRC traceable clock to the network
* Reference 1 receives Quality Level (QL) - EEC1
* Reference 2 receives QL - SSU-A
* BITS sets QL-SSU-B
Which quality level will MLS1 deliver to POC2-1 on its Synchronous Ethernet (SyncE) port 1/2/7?
A. QL-EEC1
B. QL-PRC
C. QL-SSU-A
D. QL-STU
Answer: B

Alcatel-Lucent   4A0-M01   4A0-M01   certification 4A0-M01

NO.7 Which timing technique can deliver time of day and phase synchronization information to the base
station without concern for Packet Delay Variation (PDV)?
A. Building Integrated Timing Supply (BITS)
B. Global Positioning System (GPS)
C. Adaptive Clock Recovery (ACR)
D. IEEE 1588v2/Precision Time Protocol (PTP)
Answer: B

Alcatel-Lucent   4A0-M01   4A0-M01   certification 4A0-M01

NO.8 Click on the exhibit.
Given the show command results shown:
Which IEEE 1588v2/Precision Time Protocol (PTP) v2 parent clock value does the slave first consider
when choosing its master?
A. GM Clock Priority1
B. GM Clock ID
C. GM Clock Priority2
D. GM Clock Class
Answer: D

certification Alcatel-Lucent   4A0-M01   4A0-M01

NO.9 Which synchronization technique supports time of day and phase synchronization?
A. IEEE 1588 v2/Precision Time Protocol (PTP)v2
B. Adaptive Clock Recovery (ACR)
C. Time Division Multiplexing (TDM) line timing
D. Synchronization Ethernet (SyncE)/Synchronization Status Message (SSM)
Answer: A

certification Alcatel-Lucent   4A0-M01   4A0-M01   4A0-M01   4A0-M01 examen

NO.10 An SROS router obtains its timing exclusively from its BITS input port. The router sets Quality Level
(QL) SONET Traceability Unknown (STU) on this Superframe (SF) framed DS1 BITS reference.
What must you configure on this master router to pass the best clock quality level to the downstream
Synchronous Ethernet (SyncE) slave nodes while maintaining traceability to the DS1 source?
A. Enable "ql-override prs" on the BITS reference
B. Enable "ql-override prs" on the master's SyncE ports
C. Enable "ql-selection prs" on the BITS reference
D. Set the master router to choose its source by quality level
Answer: A

Alcatel-Lucent   certification 4A0-M01   4A0-M01   4A0-M01

NO.11 When researching carrier-class Ethernet standards to support the mobile backhaul Ethernet transport,
which standards body would you consult?
A. IEEE
B. MEF
C. ITU-T
D. NGMN
Answer: B

Alcatel-Lucent   4A0-M01 examen   4A0-M01   4A0-M01   certification 4A0-M01

NO.12 Click on the exhibit.
Given the configuration shown and the following conditions:
* The external reference is offline
* Reference 1 receives Quality Level (QL) - EEC1
* Reference 2 receives QL - SSU-A
Which quality level will the SAR router advertise to its Synchronous Ethernet (SyncE) peers?
A. QL-DNU
B. QL-EEC1
C. QL-SSU-A
D. QL-PRC
E. QL-UNC
Answer: B

Alcatel-Lucent examen   4A0-M01   4A0-M01   4A0-M01 examen   4A0-M01   4A0-M01

NO.13 The IETF is know for which standardization effort.?
A. It develops recommendations for core network functionality, broadband service delivery and next
generation services
B. It maintains Requests for Comment (RFC) that describe technical solutions to Internet challenges
C. It creates single, integrated network design guidelines to support mobile broadband services
D. It develops radio access services and systems for high capacity mobile networks
Answer: B

certification Alcatel-Lucent   4A0-M01   4A0-M01   4A0-M01 examen   4A0-M01

NO.14 Which messages, periodically sent between an IEEE 1588v2/Precision Time Protocol (PTP) v2 master
and slave, serve as hellos to help the slave choose the best available master?
A. Announce
B. Announce_grant
C. Sync
D. Delay_response
Answer: A

Alcatel-Lucent examen   4A0-M01   4A0-M01 examen   4A0-M01

NO.15 Which statement best describes adaptive timing techniques?
A. Adaptive timing calculates the time of day from time stamped packets
B. Adaptive timing calculates the time of day from the arriving packet rate
C. Adaptive timing only supports frequency synchronization
D. Adaptive timing only operates on point-to-point links
Answer: A

certification Alcatel-Lucent   4A0-M01   4A0-M01 examen   4A0-M01   4A0-M01

NO.16 In the Alcatel-Lucent SROS, which command creates the OC-3 path's Administrative Unit (AU)-4 Virtual
Container (VC) capacity?
A. configure port 3/1/2 sonet-sdh path au-4
B. configure port 3/1/2 sonet-sdh path sts3
C. configure port 3/1/2 sonet-sdh path tug-3
D. configure port 3/1/2 sonet-sdh path vc-4
Answer: B

Alcatel-Lucent   4A0-M01 examen   certification 4A0-M01

NO.17 Which statement correctly describes the Point-to-Point (PPP) Multilink Protocol (MP) negotiation
process?
A. At least one link must complete Link Control Protocol (LCP) negotiations before the bundle can
initialize
B. The endpoints indicate their desire to implement MP in the link Network Control Protocol (NCP) phase
C. The bundle must complete LCP negotiations before it can enter the NCP negotiation phase
D. Internet Protocol-Control Protocol (IPCP) negotiations must succeed for the bundle links to initialize
Answer: A

Alcatel-Lucent   certification 4A0-M01   certification 4A0-M01

NO.18 In the Alcatel-Lucent SROS, which payload type set in a SDH-framed OC-12 port creates individual E1
containers?
A. Virtual Tributary (VT) 1.5
B. VT2
C. Virtual Container (VC)-11
D. VC-12
Answer: B

Alcatel-Lucent   4A0-M01   4A0-M01

NO.19 Click on the exhibit.
Given the following:
On the OC-3 port, each provisioned channel group contains all available timeslots.
The command result illustrates which circuit status?
A. The E1 channel group is administratively turned down
B. The DS1 circuit physical link is operationally down
C. The IMA bundle has no operational member links
D. The associated Layer 3 interface is operationallydown
Answer: B

Alcatel-Lucent   4A0-M01   4A0-M01 examen   certification 4A0-M01

NO.20 Click on the exhibit.
On the OC-3 port, each provisioned channel group contains all available timeslots
The command result illustrates which OC-3 port characteristic?
A. On STS1-1,the second VT1.5 in the second VTG is set for IPCP encapsulation
B. On STS1-1,the second DS1 channel group in the second VTG isoperationallyup
C. On STS1-1, the second E1 channel group in the second TUG-2 is operationally up
D. On STS1-1, the second VT2 in the second TUG-2 is set for IPCP encapsulation
Answer: C

Alcatel-Lucent examen   4A0-M01   4A0-M01   4A0-M01

Pass4Test peut offrir nombreux de documentations aux candidats de test Alcatel-Lucent 4A0-M01, et aider les candidats à réussir le test. Les marétiaux visés au test Alcatel-Lucent 4A0-M01 sont tout recherchés par les experts avec leurs connaissances professionnelles et les expériences. Les charactéristiques se reflètent dans la bonne qualité de Q&A, la vitesse de la mise à jour. Le point plus important est que notre Q&A est laquelle le plus proche du test réel. Pass4Test peut vous permettre à réussir le test Alcatel-Lucent 4A0-M01 100%.