Nous croyons que pas mal de candidats voient les autres site web qui offrent les ressources de Q&A Microsoft 70-561. En fait, le Pass4Test est le seul site qui puisse offrir la Q&A recherchée par les experts réputés dans l'Industrie IT. Grâce à la Q&A de Pass4Test impressionée par la bonne qualité, vous pouvez réussir le test Microsoft 70-561 sans aucune doute.
Vous choisissez l'aide de Pass4Test, Pass4Test fait tous effort à vous aider à réussir le test. De plus, la mise à jour de Q&A pendant un an est gratuite pour vous. Vous n'avez plus raison à hésiter. Pass4Test est une meilleure assurance pour le succès de test Microsoft 070-181. Ajoutez la Q&A au panier.
La grande couverture, la bonne qualité et la haute précision permettent le Pass4Test à avancer les autre sites web. Donc le Pass4Test est le meilleur choix et aussi l'assurance pour le succès de test Microsoft 070-486.
Peut-être vous voyez les guides d'études similaires pour le test Microsoft 70-561, mais nous avons la confiance que vous allez nous choisir finalement grâce à notre gravité d'état dans cette industrie et notre profession. Pass4Test se contribue à amérioler votre carrière. Vous saurez que vous êtes bien préparé à passer le test Microsoft 70-561 lorsque vous choisissez la Q&A de Pass4Test. De plus, un an de service gratuit en ligne après vendre est aussi disponible pour vous.
Code d'Examen: 70-561
Nom d'Examen: Microsoft (TS: MS .NET Framework 3.5, ADO.NET Application Development)
Questions et réponses: 170 Q&As
Code d'Examen: 070-181
Nom d'Examen: Microsoft (TS: Forefront Protection for Endpoints & Apps, Configuring)
Questions et réponses: 77 Q&As
Code d'Examen: 070-486
Nom d'Examen: Microsoft (Developing ASP.NET MVC 4 Web Applications)
Questions et réponses: 68 Q&As
Est-que vous s'inquiétez encore à passer le test Certification 070-486 qui demande beaucoup d'efforts? Est-que vous travaillez nuit et jour juste pour préparer le test de Microsoft 070-486? Si vous voulez réussir le test Microsoft 070-486 plus facilement? N'hésitez plus à nous choisir. Pass4Test vous aidera à réaliser votre rêve.
70-561 Démo gratuit à télécharger: http://www.pass4test.fr/70-561.html
NO.1 myConnection.Close();
NO.2 You create an application by using the Microsoft .NET Framework 3.5 and Microsoft ADO.NET. The
application connects to a Microsoft SQL Server 2005 database.
The application analyzes large amounts of transaction data that are stored in a different database.
You write the following code segment. (Line numbers are included for reference only.)
01 Using connection As New SqlConnection(sourceConnectionString)
02 Using connection2 As _
New SqlConnection(destinationConnectionString)
03 Using command As New SqlCommand()
04 connection.Open()
05 connection2.Open()
06 Using reader As SqlDataReader = command.ExecuteReader()
07 Using bulkCopy As New SqlBulkCopy(connection2)
08
09 End Using
10 End Using
11 End Using
12 End Using
13 End Using
You need to copy the transaction data to the database of the application.
Which code segment should you insert at line 08?
A. reader.Read()
bulkCopy.WriteToServer(reader)
B. bulkCopy.DestinationTableName = "Transactions"
bulkCopy.WriteToServer(reader)
C. bulkCopy.DestinationTableName = "Transactions"
AddHandler bulkCopy.SqlRowsCopied, _
AddressOf bulkCopy_SqlRowsCopied
D. While reader.Read()
bulkCopy.WriteToServer(reader)
End While
Answer: B
Microsoft examen certification 70-561 70-561 70-561 examen 70-561 examen
NO.3 }
You need to compute the total number of records processed by the Select queries in the RecordCount
variable.
Which code segment should you insert at line 16?
A. myReader = myCommand.ExecuteReader();
RecordCount = myReader.RecordsAffected;
B. while (myReader.Read())
{
//Write logic to process data for the first result.
}
RecordCount = myReader.RecordsAffected;
C. while (myReader.HasRows)
{
while (myReader.Read())
{
//Write logic to process data for the second result.
RecordCount = RecordCount + 1;
myReader.NextResult();
}
}
D. while (myReader.HasRows)
{
while (myReader.Read())
{
//Write logic to process data for the second result.
RecordCount = RecordCount + 1;
}
myReader.NextResult();
}
Answer: D
certification Microsoft 70-561 examen certification 70-561 certification 70-561 certification 70-561
22. You create an application by using the Microsoft .NET Framework 3.5 and Microsoft ADO.NET. The
application uses Microsoft SQL Server 2005.
You write the following code segment. (Line numbers are included for reference only.)
01 Dim myConnString As String = _
02 "User ID=<username>;password=<strong password>;" + _
03 "Initial Catalog=pubs;Data Source=myServer"
04 Dim myConnection As New SqlConnection(myConnString)
05 Dim myCommand As New SqlCommand()
06 Dim myReader As DbDataReader
07 myCommand.CommandType = CommandType.Text
08 myCommand.Connection = myConnection
09 myCommand.CommandText = _
10 "Select * from Table1;Select * from Table2;"
11 Dim RecordCount As Integer = 0
12 Try
13 myConnection.Open()
14
15 Catch ex As Exception
16 Finally
17 myConnection.Close()
18 End Try
You need to compute the total number of records processed by the Select queries in the RecordCount
variable.
Which code segment should you insert at line 14?
A. myReader = myCommand.ExecuteReader()
RecordCount = myReader.RecordsAffected
B. While myReader.Read()
'Write logic to process data for the first result.
End While
RecordCount = myReader.RecordsAffected
C. While myReader.HasRows
While myReader.Read()
'Write logic to process data for the second result.
RecordCount = RecordCount + 1
myReader.NextResult()
End While
End While
D. While myReader.HasRows
While myReader.Read()
'Write logic to process data for the second result.
RecordCount = RecordCount + 1
End While
myReader.NextResult()
End While
Answer: D
Microsoft 70-561 examen 70-561 certification 70-561 certification 70-561 70-561
23. You create an application by using the Microsoft .NET Framework 3.5 and Microsoft ADO.NET.
The application uses data from a Microsoft SQL Server 2005 database table. A Web page of the
application contains a GridView server control.
You write the following code segment. (Line numbers are included for reference only.)
01 private void LoadGrid()
02 {
03 using (SqlCommand command = new SqlCommand())
04 {
05 command.Connection = connection;
06 command.CommandText = "SELECT * FROM Customers";
07 connection.Open();
08
09 }
10 }
You need to retrieve the data from the database table and bind the data to the DataSource property of the
GridView server control.
Which code segment should you insert at line 08?
A. SqlDataReader rdr = command.ExecuteReader();
connection.Close();
GridView1.DataSource = rdr;
GridView1.DataBind();
B. SqlDataReader rdr = command.ExecuteReader();
GridView1.DataSource = rdr.Read();
GridView1.DataBind();
connection.Close();
C. SqlDataReader rdr = command.ExecuteReader();
Object[] values = new Object[rdr.FieldCount];
GridView1.DataSource = rdr.GetValues(values);
GridView1.DataBind();
connection.Close();
D. DataTable dt = new DataTable();
using (SqlDataReader reader = command.ExecuteReader())
{
dt.Load(reader);
}
connection.Close();
GridView1.DataSource = dt;
GridView1.DataBind();
Answer: D
certification Microsoft 70-561 certification 70-561 70-561 examen certification 70-561
24. You create an application by using the Microsoft .NET Framework 3.5 and Microsoft ADO.NET.
The application uses data from a Microsoft SQL Server 2005 database table. A Web page of the
application contains a GridView server control.
You write the following code segment. (Line numbers are included for reference only.)
01 Private Sub LoadGrid()
02 Using command As New SqlCommand()
03 command.Connection = connection
04 command.CommandText = "SELECT * FROM Customers"
05 connection.Open()
06
07 End Using
08 End Sub
You need to retrieve the data from the database table and bind the data to the DataSource property of the
GridView server control.
Which code segment should you insert at line 06?
A. Dim rdr As SqlDataReader = command.ExecuteReader()
connection.Close()
GridView1.DataSource = rdr
GridView1.DataBind()
B. Dim rdr As SqlDataReader = command.ExecuteReader()
GridView1.DataSource = rdr.Read()
GridView1.DataBind()
connection.Close()
C. Dim rdr As SqlDataReader = command.ExecuteReader()
Dim values As Object() = New Object(rdr.FieldCount - 1) {}
GridView1.DataSource = rdr.GetValues(values)
GridView1.DataBind()
D. Dim dt As New DataTable()
Using reader As SqlDataReader = command.ExecuteReader()
dt.Load(reader)
End Using
connection.Close()
GridView1.DataSource = dt
GridView1.DataBind()
Answer: D
Microsoft examen 70-561 examen certification 70-561 70-561 examen certification 70-561 70-561 examen
NO.4 You create an application by using the Microsoft .NET Framework 3.5 and Microsoft ADO.NET. The
application connects to a Microsoft SQL Server 2005 database.
The application throws an exception when the SQL Connection object is used.
You need to handle the exception.
Which code segment should you use?
A. Try
If conn IsNot Nothing Then
conn.Close()
' code for the query
End If
Catch ex As Exception
' handle exception
Finally
If conn Is Nothing Then
conn.Open()
End If
End Try
B. Try
' code for the query
conn.Close()
Catch ex As Exception
' handle exception
Finally
If conn IsNot Nothing Then
conn.Open()
End If
End Try
C. Try
' code for the query
conn.Open()
Catch ex As Exception
' handle exception
Finally
If conn IsNot Nothing Then
conn.Close()
End If
End Try
D. Try
' code for the query
conn.Open()
Catch ex As Exception
' handle exception
Finally
If conn Is Nothing Then
conn.Close()
End If
End Try
Answer: C
Microsoft 70-561 70-561 examen
NO.5 You create an application by using the Microsoft .NET Framework 3.5 and Microsoft ADO.NET. The
application connects to a Microsoft SQL Server 2005 database.
The application analyzes large amounts of transaction data that are stored in a different database.
You write the following code segment. (Line numbers are included for reference only.)
01 using (SqlConnection connection = new
SqlConnection(sourceConnectionString))
02 using (SqlConnection connection2 = new
SqlConnection(destinationConnectionString))
03 using (SqlCommand command = new SqlCommand())
04 {
05 connection.Open();
06 connection2.Open();
07 using (SqlDataReader reader = command.ExecuteReader())
08 {
09 using (SqlBulkCopy bulkCopy = new
SqlBulkCopy(connection2))
10 {
11
12 }
13 }
14 }
You need to copy the transaction data to the database of the application.
Which code segment should you insert at line 11?
A. reader.Read()
bulkCopy.WriteToServer(reader);
B. bulkCopy.DestinationTableName = "Transactions";
bulkCopy.WriteToServer(reader);
C. bulkCopy.DestinationTableName = "Transactions";
bulkCopy.SqlRowsCopied += new
SqlRowsCopiedEventHandler(bulkCopy_SqlRowsCopied);
D. while (reader.Read())
{
bulkCopy.WriteToServer(reader);
}
Answer: B
Microsoft 70-561 70-561 examen 70-561 certification 70-561
NO.6 You create an application by using the Microsoft .NET Framework 3.5 and Microsoft ADO.NET. The
application connects to a Microsoft SQL Server 2005 database.
You write the following code segment.
Dim queryString As String = "Select Name, Age from dbo.Table_1"
Dim command As New _SqlCommand(queryString, DirectCast(connection, SqlConnection))
You need to get the value that is contained in the first column of the first row of the result set returned by
the query.
Which code segment should you use?
A. Dim value As Object = command.ExecuteScalar()
Dim requiredValue As String = value.ToString()
B. Dim value As Integer = command.ExecuteNonQuery()
Dim requiredValue As String = value.ToString()
C. Dim value As SqlDataReader = _command.ExecuteReader(CommandBehavior.SingleRow)
Dim requiredValue As String = value(0).ToString()
D. Dim value As SqlDataReader = _command.ExecuteReader(CommandBehavior.SingleRow)
Dim requiredValue As String = value(1).ToString()
Answer: A
Microsoft 70-561 examen 70-561 examen certification 70-561
NO.7 You create an application by using the Microsoft .NET Framework 3.5 and Microsoft ADO.NET.
The application has a DataTable object named OrderDetailTable. The object has the following columns:
ID
OrderID
ProductID
Quantity
LineTotal
The OrderDetailTable object is populated with data provided by a business partner. Some of the records
contain a null value in the LineTotal field and 0 in the Quantity field.
You write the following code segment. (Line numbers are included for reference only.)
01 Dim col As New DataColumn("UnitPrice", GetType(Decimal))
02
03 OrderDetailTable.Columns.Add(col)
You need to add a DataColumn named UnitPrice to the OrderDetailTable object.
Which line of code should you insert at line 02?
A. col.Expression = "LineTotal/Quantity"
B. col.Expression = "LineTotal/ISNULL(Quantity, 1)"
C. col.Expression = "LineTotal.Value/ISNULL(Quantity.Value, 1)"
D. col.Expression = "iif(Quantity > 0, LineTotal/Quantity, 0)"
Answer: D
Microsoft examen certification 70-561 certification 70-561
NO.8 You create an application by using the Microsoft .NET Framework 3.5 and Microsoft ADO.NET.
You need to ensure that the application can connect to any type of database.
What should you do?
A. Set the database driver name in the connection string of the application, and then create the
connection object in the following manner.
DbConnection connection = new OdbcConnection(connectionString);
B. Set the database provider name in the connection string of the application, and then create the
connection object in the following manner.
DbConnection connection = new OleDbConnection(connectionString);
C. Create the connection object in the following manner.
DbProviderFactory factory = DbProviderFactories.GetFactory("System.Data.Odbc");
DbConnection connection = factory.CreateConnection();
D. Create the connection object in the following manner.
DbProviderFactory factory = DbProviderFactories.GetFactory(databaseProviderName);
DbConnection connection = factory.CreateConnection();
Answer: D
certification Microsoft certification 70-561 70-561 examen 70-561 examen certification 70-561
没有评论:
发表评论